genAG

Information

2021 Grimme REXOR 630

The 6-row, 625 HP REXOR 630 is a 3-axle beet harvester with 30 t (45 m³) large bunker. Obligatory features are dog-legged left and right hand side positioning of the wheels and a narrow turning circle of 7.5 m, which lends a machine of this size a highly manoeuvrable. Thanks to its intelligent drive technology, combined with the latest in engine technology (automotive driving in the speed range between 1150 and 1500 rpm, exhaust gas standard stage IV), the REXOR 630 is very fuel-efficient.

The hydraulically driven Oppel wheel lifts the crop out of the ground in an extremely gentle way and with minimal earth build-up.

The result of defoliation with a FM is a completely leaf-free beet head without scalping the crop.

High output through the 900 wide and 500 mm high channel of the transporting conveyor.

As an alternative to Oppel wheels, the so-called walking shares can be selected to lift the crop out of the ground.

Features may include:

• The standard slope stability system BaSYS, in conjunction with the low machine centre of gravity and the distribution auger, which is decoupled from the ring elevator and can therefore be lowered independently, ensures a high slope stability.

• Two flail shafts are fitted to the defoliator type "FM" and therefore a scalper unit is not required. Loss of weight and loss of valuable ingredients, due to breathing during storage in the clamp, are kept to a minimum. The result is a perfect beet with a maximum of mass yield.

• Since the rubber flails of the FM front mulcher and the multi chopper clean the beets all around and also remove withered beet leaf very well in dry stands, less beet leaf get in the clamps than with other defoliation systems. This means fewer deduction in the sugar factory.

• Double sided driven

• Lifts the beet in an active but extremely gentle way from the ground

• An increased harvesting speed is possible without a loss of quality or loss of beets

• A large amount of trash is sieved off during the digging process

• Especially well in wet conditions

• The "rolling" movement of the Oppel wheels ensures a trouble-free operation in heavily weeded crops

• Gentle setting of the following cleaning units

• Low wear

• Universal use

• Clean and reliable work in changing conditions

• Optimum visibility from the cab compared to conventional systems

• Especially well in dry conditions

• Easy maintenance due to easy access to the shares in the maintenance position