2021 Grimme GT Series 300

Swipe to View More

  • Year 2021
  • Make Grimme
  • Model GT Series
2021 Grimme GT Series 300

2021 Grimme GT Series 300

2021 Grimme GT Series 300

Centre trailed, 3-row, for varying harvest conditions

Harvesting procedures with continuous overloading are particular efficient. The concept of frame and drives of the elevator harvester, type GT 300, are based on the centre trailed, well proven GT 170, offering the driver an unobstructed view of the digging units and main webs. Instead of the conventional two rows, this elevator harvester is designed to harvests three rows at a single pass - this means an increase in performance of up to 50%! The machine comes with the automatic depth control "TerraControl" as standard. Digging depth and diablo pressure remain constant at any time and with every soil contour – even individually per row! The straight crop flow, minimal drop steps and a wide range of different separators are the most important arguments for this harvester. The MultiSep and the double MultiSep are particularly variable and gentle to the crop - even under the most difficult conditions with low sieving ability of the soil. For haulm separation, the machine can be additionally equipped with a fine haulm elevator. The length and flexibility of the cart elevator ensure a smooth and gentle discharge of the crop even into deep trailers.

50 % higher performance

The machine is able to achieve an increased performance of up to 50 % per crossing, compared to a two-row elevator harvester.

Double MultiSep for changing harvest conditions

Twice as much MultiSep for twice as much power - adaptable to a wide range of conditions.

Separator for additional haulm separation

Using a fine haulm elevators, the separation of trash such as haulm fine weed and loose soil can be significantly increased. This separator shows its full potential especially in carrots.

Elevator with active side panels for gentle crop handling

The conveying pockets are closed on both sides by elastic rubber fingers. They enable gentle crop transport without friction. At the same time, the rubber fingers are so flexible that they can be used permanently and almost wear-free at all deflection points.

Additional cleaning

The cart elevator can be equipped with the perforated, high-strength, permanently elastic PU pockets, called OptiBag. The large-volume, net-like conveying pockets ensure an additional sieving of heavy soil during the overloading process of the crop.

Features may include:

Crop protection
  • Main webs with high-cam belt for optimum gentle crop handling
  • Reduced drop heights throughout the machine for a gentle crop transfer
  • Gentle but high capacity harvesting
High acreage performance and separating effect
  • Extracting roller, extracting unit and fine haul elevator for haulm separation
  • Versatile sieving helps: Rotary agitator and / or hydraulic rocker agitator
  • Separator type is Roller Separator
  • Double MultiSep separator, the “all-rounder“, even in heavy harvesting conditions
Chassis
  • The hydrostatic wheel drive provides additional tractive force. This is particularly useful in wet harvesting conditions and in combination with narrow tyres on the tractor.
A second hydraulic cylinder for inclination allows the entire machine to be raised in a steeper position, and thus increases the sieving performance.
  • Digital operator terminal VC 50 incl. colour display, touch-screen function and digital machine diagnostics realize a high operator comfort
  • TerraControl: Hydraulic ridge pressure relief and independent depth control
  • Perfectly comfortable

Engine

Engine Power Min: 115 kW

PTO

PTO Power, Rated Engine Speed Input speed p.t.o.-shaft: 540 / 1000 rpm

Wheels & Tires

Wheels 600/55-26.5

Operational

Operating Speed Transport speed (option): 25 km/h
Operating Conditions Unloading elevator service: 160 t/h

Hydraulics

Hydraulic Flow Oil flow: 70 l/min
Hydraulic Type Non-pressurized return flow: 1
Relief Valve Setting Required control valves (single acting): 1 | Required control valves (double acting): 1

Dimensions

Dimensions Sieving area intake web: 3,48 m² | 1st main web sieving area: 7,5 m² | 2nd main web sieving area: 2 m²
Height 3450 mm | Unloading elevator Transfer: 4000 mm
Length 12570 mm
Width 3260 mm | Intake web: 1700 mm | 1st main web: 1700 mm | 2nd main web: 1700 mm | Width of overloading elevator: 1200 mm | Unloading elevator Transfer: 3500 mm

Capacities

Load Capacity, Land Permitted bearing load drawbar: 1800 kg

Weights

Weight Empty with basic configuration: 9500 kg

Product Photography